Alvarion BreezeACCESS 4900 Manuel d'utilisateur télécharger pdf (Page 13)

Page 13 of 13

• The Automatic Distance Learning in mixed cells (version 4.0 and version 3.1) and a 10 MHz

bandwidth did not operate properly, resulting in reduced performance due to errors in the

distance calculations. The problem was solved.

• VLAN Relaying did not operate properly – all packets were relayed regardless of their VLAN

ID. The problem was solved.

• In some scenarios, AUs with HW revision A or B were “stuck”, causing disassociation of all

SUs. The problem was solved.

• In some scenarios, AUs were reporting a wrong number for the Number of Associations Since

Last Reset parameter. The problem was solved.

• The delay indicated when pinging an SU from behind an AU was sometimes longer than the

actual delay. This problem was solved.

• In previous versions the default UDP Port for DRAP was 8170. It has been changed to 8171

for compatibility with the Voice Gateways’ default port number.

• Sometimes, when downloading a very small log file, the unit reset itself. This problem was

fixed.

• Sometimes, when downgrading from version 4.0 to a lower version, the IP address was lost

and set to the default one. This problem was fixed.

12 Note for Australian customers

For compliance with Australian regulations the following rules must be followed:

• In the 5.4 GHz band, the following frequencies should not be used:

 @ 20 MHz Bandwidth: 5600, 5620, 5640 MHz

 @ 10 MHz Bandwidth: 5600, 5605, 5615, 5620, 5625, 5635, 5640, 5645 MHz

• In the 5.8 GHz band, the Maximum Transmit Power parameter of the Subscriber Unit should

be manually set so that the EIRP will not exceed 36 dBm.

ALVARION LTD.

21A HABARZEL STREET,

TEL AVIV, 69710,

ISRAEL

TEL: 972-3-6456262

FAX: 972-3-6456222

HTTP://WWW.ALVARION.COM

1 2 ... 8 9 10 11 12 13

Pas de commentaire

Alvarion BreezeACCESS 4900 Manuel d'utilisateur Page 13