Alvarion BreezeACCESS II CX Guide de l'utilisateur télécharger pdf (Page 81)

Preparing the Indoor to Outdoor Cable

B-1

Appendix B

The following figure shows the wire pair connections required for the indoor-to-

outdoor cable.

12345678

1 + 2

4 + 5

7 + 8

3 + 6

Ethernet Connector Pin Assignments

The color codes used in cables supplied by Alvarion are:

Wire color Pin

Blue 1

Blue/white 2

Orange 3

Orange/white 6

Brown 4

Brown/white 5

Green 7

Green/white 8

Use a crimp tool for RJ-45 connectors to prepare the wires. Insert them into the

appropriate pins and use the crimp tool to crimp the connector. Make sure to do

the following:

1. Remove as small a length as possible of the external jacket. Verify that the

external jacket is well inside the service box to ensure good sealing.

2. Take back the shield drain wire before inserting the cable into the connector,

to ensure a good connection with the connector’s shield after crimping.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 89 90

Pas de commentaire

Alvarion BreezeACCESS II CX Guide de l'utilisateur Page 81